Fidonet Portal




Create a new topic
  Replies48 Views 0
From:  nelsonse48@gmail.com (3:770/3)
To: n/a
Date: Thu, 29 July 2021 Telnet ( 1 2 3) I want to telnet from my rpi (buster) to another computer as a 'VT100' (or similar, vt102 etc) terminal. I don't want to mess up my lxterminal for rpi use. Suggestions? --Steve --- SoupGat...
  Replies0 Views 0
From:  The Natural Philosopher (3:770/3)
To: n/a
Date: Thu, 29 July 2021 Re: Telnet On 29/07/2021 20:12, nelso...@gmail.com wrote: > I want to telnet from my rpi (buster) to another computer as a > 'VT100' (or similar, vt102 etc) terminal. I don't want to mess up my > lx...
  Replies5 Views 1
From:  D.M. Procida (3:770/3)
To: n/a
Date: Tue, 27 July 2021 DAC + amp for Raspberry Pi 32c89bb5 I've had excellent experiences with several Allo DACs, and also the Pimoroni pHAT DAC. I now need a very small set-up to drive a pair of small bookshelf speakers. It doesn't need to ser...
  Replies6 Views 0
From:  nelsonse48@gmail.com (3:770/3)
To: n/a
Date: Mon, 26 July 2021 Samba (smb/cifs) My rpi2 running buster needs to provide guest access as a smb1 server. How do I know what samba version I am running? How do I force smb1, not 2 or 3? --Steve --- SoupGate-Win32 v1.05 * Or...
  Replies0 Views 0
From:  NY (3:770/3)
To: n/a
Date: Mon, 26 July 2021 Re: Samba (smb/cifs) "nelso...@gmail.com" <nelsonse48@gmail.com> wrote in message news:d5472c43-66fc-45f7-ac78-467df343d309n@googlegroups.com... > My rpi2 running buster needs to provide guest access ...
  Replies3 Views 0
From:  Martin Gregorie (3:770/3)
To: n/a
Date: Mon, 26 July 2021 Mystery solved A was wondering why the last two Raspbian updates did now't: now I understand why, because a piece in El Reg today says that Debian Buster gets replaced by Bullseye in mid-August with, presumably Ra...
  Replies107 Views 22
From:  Adam Funk (3:770/3)
To: n/a
Date: Wed, 14 July 2021 Pi lightweight server with USB SSD instead of powered HDD? ( ... 2 3 4 5 6) Hi, For a lightweight server based on a Pi 3 or 4, the recommendation was to use an externally powered USB hard drive (rather than powering it from the Pi's USB port) for better reliability. N...
  Replies57 Views 139
From:  Pete (3:770/3)
To: n/a
Date: Wed, 17 March 2021 Re: New BBC and Absolute radio streaming URLS ( 1 2 3) In article <s2kb2k$lg4$1@dont-email.me>, David Taylor <david-taylor@blueyonder.co.uk> wrote: >On 13/03/2021 13:11, The Natural Philosopher wrote: >> For people who just want t...
  Replies6 Views 0
From:  Deloptes (3:770/3)
To: n/a
Date: Sat, 26 June 2021 RPi4 + Kodi and performance Hi, question might have been asked, but I can not find an answer easy (especially for my use case). I have very bad video performance on RPi4 + Debian + Kodi 18.9 IT is as if the video accelerat...
  Replies2 Views 4
From:  Jack (3:770/3)
To: n/a
Date: Thu, 15 July 2021 Swap rpi3 to rpi4 with same SD card Hello, I just got a rpi4, ans seen that I have too many thing installed on my rpi3, I want to take the sd card from the rpi3 and put it on the rpi4. I'm following this tutorial <https://sev...
  Replies16 Views 55
From:  nelsonse48@gmail.com (3:770/3)
To: n/a
Date: Mon, 03 May 2021 X11R6? I am trying to compile/install pgm last built from wheezy onto a rpi running buster os. The make and Makefile refer to /usr/X11R6 which doesn't exist in buster. What to do? (pgm in question is ...
  Replies1 Views 0
From:  Pancho (3:770/3)
To: n/a
Date: Wed, 14 July 2021 Re: Pi lightweight server with USB SSD instead of powered HDD? On 14/07/2021 09:18, Adam Funk wrote: > Hi, > > For a lightweight server based on a Pi 3 or 4, the recommendation was > to use an externally powered USB hard drive (rather than powerin...
  Replies10 Views 12
From:  zeneca (3:770/3)
To: n/a
Date: Tue, 13 July 2021 Re: and now another one typo.. Le 13/07/2021 a' 15:54, zeneca a e'crit : > The previous problem is fixed I replaced the driver 8188eu.OK But > when I reboot the address on the wlan0 is 196.xx.254.27 outside my > networ...
  Replies3 Views 0
From:  Simple Simon (3:770/3)
To: n/a
Date: Fri, 09 July 2021 SD Card Copier I have a Raspberry Pi 4b with the latest Buster Desktop running some weather station software on a 400GB SD. I have used sudo raspi-config and set it to boot from a USB disk if present. I want ...
  Replies0 Views 0
From:  zeneca (3:770/3)
To: n/a
Date: Tue, 13 July 2021 and now another one The previous problem is fixed I replaced the driver 8188eu.OK But when I reboot the address on the wlan0 is 192.168.0.17 outside my network 192.168.0.xx I can't figure out where that com from? I c...
  Replies6 Views 4
From:  Richard Falken (1:123/115)
To: n/a
Date: Sun, 11 July 2021 ipv6 Re: ipv6 By: zeneca to All on Sun Jul 11 2021 11:34 am > Hello, > I have disabled ipv6 on my Raspberry, by configuring /etc/sysctl.conf, > but still port 22 (ssh) is hold by tcp6. ...
  Replies0 Views 0
From:  zeneca (3:770/3)
To: n/a
Date: Sun, 11 July 2021 ipv6 Hello, I have disabled ipv6 on my Raspberry, by configuring /etc/sysctl.conf, but still port 22 (ssh) is hold by tcp6. netstat show tcp6 ..22[ssh] ..1/init ? no more inet6 on ifconfig when I ...
  Replies0 Views 5
From:  Theo (3:770/3)
To: n/a
Date: Fri, 09 July 2021 Re: SD Card Copier Simple Simon <please.dontspa@me.com> wrote: > Normally I would shut the Pi down and use Apple Pi Baker to clone the SD > card and then write the image to the USB Disk. > > This w...
  Replies16 Views 10
From:  F. W. (3:770/3)
To: n/a
Date: Mon, 05 July 2021 Windows 11 on a Raspi 400... ...it runs. But is only for the curious and patient ones... :-D FW --- SoupGate-Win32 v1.05 * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3) ...
  Replies6 Views 56
From:  koltin@bintegratedtech.com (3:770/3)
To: n/a
Date: Thu, 18 June 2020 Re: Autostart python in lxterminal? I know this issue is old, but I have been trying to figure out how to get a python script to load using the LXDE-pi/autostart file, and I made it slightly easy on myself to start by creating a /st...
Legend: New Messages New Messages   No New messages No New messages   Locked (w/ unread messages) Locked (w/ unread messages)   Locked Locked   Moved to another forum Moved to another forum

ABOUT

This forum contains echomail areas hosted on Nightmare BBS You can browse local echomail areas, italian fidonet areas and a selection of international fidonet areas, reading messages posted by users in Nightmare BBS or even other BBSs all over the world. You can find file areas too (functional to fidonet technology). You can browse echomail areas and download files with no registration, but if you want to write messages in echomail areas, or use fidonet netmail (private messages with fidomet technology), you have to register. Only a minimal set of data is required, functional to echomail and netmail usage (name, password, email); a registration and login with facebook is provided too, to allow easy registration. If you won't follow rules (each echomail areas has its own, regularly posted in the echomail), your account may be suspended;

CONTACT