Fidonet Portal

![]() From: Chris Green (2:221/10) To: n/a Date: Thu, 02 December 2021 Why is systemd-resolved.service disabled on Pi? From: Chris Green <cl@isbd.net> So, to continue from my other question.... Why is systemd-resolved.service disabled, at least it's disabled on my Pi systems (some very old ones and an ear... |
![]() From: Chris Green (2:221/10) To: n/a Date: Wed, 01 December 2021 Does a basic Pi installation use dnsmasq or systemd.resolvd? From: Chris Green <cl@isbd.net> To avoid having to do a clean install myself does anyone know if an "out of the box" installation of Raspberry Pi OS uses dnsmasq or systemd.resolv... |
![]() From: bob prohaska (2:221/10) To: n/a Date: Mon, 29 November 2021 Scripting u-boot commands From: bob prohaska <bp@www.zefox.net> Is it possible to implement a script to be execuated by u-boot in place of the default behavior? What's needed is something like while true do usb r... |
![]() From: bob prohaska (2:221/10) To: n/a Date: Thu, 25 November 2021 Bootcode.bin documentation? From: bob prohaska <bp@www.zefox.net> Is there any documentation available for setting up bootcode.bin to boot a USB hard disk? When I tried a few days ago, boot went straight to network, n... |
![]() From: Daniel Michaels (2:221/10) To: n/a Date: Wed, 24 November 2021 Hello, I have a raspberry PI4 I want to boot Android from the USB From: Daniel Michaels <skipperdan76@gmail.com> I have all the updates installed, I can boot Raspian from card or USB. I can boot Android from the card but not the USB. error code comes up a... |
![]() From: bob prohaska (2:221/10) To: n/a Date: Wed, 17 November 2021 Bootcode.bin USB storage discovery I'm having difficulties getting a Pi3b+ to reliably detect a USB hard drive on boot. Getting into the shell on u-boot it's possible to repeatedly probe using usb reset and eventually the drive sho... |
![]() From: Hans-Werner Kneitinger (2:221/10) To: n/a Date: Wed, 10 November 2021 libxcb1 install problem ( ![]() |
![]() From: Nick Mackechnie (2:221/10) To: n/a Date: Mon, 15 November 2021 apt update Hi All, When I run sudo apt update on my pi, I receive the following error: Linux thenet-pi01 5.10.63-v7+ #1459 SMP Wed Oct 6 16:41:10 BST 2021 armv7l The programs included with the Debian GN... |
![]() From: bob prohaska (2:221/10) To: n/a Date: Mon, 15 November 2021 u-boot usb mass storage discovery problems Is there a readable guide to configuring u-boot so it can find usb hard disks during boot of a raspberry pi 3b+ ? Below is a sample of a recent boot attempt, using a serial console. The hair-pull... |
![]() From: bob prohaska (2:221/10) To: n/a Date: Sat, 13 November 2021 Chromium crashes opening YouTube Anybody noticing chromium crashing immediately when opening YouTube? It started about a day ago. Everything is up-to-date, apart from the trouble with YouTube things seem more-or-less normal. This... |
![]() From: adule (2:221/10) To: n/a Date: Fri, 12 November 2021 Raspberry Pi Zero 2 W Is there any way to run the older "Buster OS - Lite" on the new Raspberry Pi Zero 2 W? I have tried an SD image that has been working on the older zero W1 as well as burning a new SD ima... |
![]() From: bob prohaska (2:221/10) To: n/a Date: Sat, 13 November 2021 Boot sequence for USB mass storage Supposing for a moment that I want to use the bootcode.bin-only method of booting a Pi3 can somebody tell me how much of the software in the DOS partiton of the USB device is invoked? I've always... |
![]() From: zeneca (2:221/10) To: n/a Date: Thu, 04 November 2021 timer interrupt ( ![]() |
![]() From: Scott Alfter (2:221/10) To: n/a Date: Tue, 09 November 2021 Free 300-MHz boost for your RPi 4 with Bullseye Depending on the SoC on your particular Raspberry Pi 4, the latest Raspbian might kick it up to 1.8 GHz: https://invidious.alfter.us/watch?v=FkMfN9GvslM tl;dr: if the second line ends in "... |
![]() From: bob prohaska (2:221/10) To: n/a Date: Wed, 10 November 2021 Mixing USB device speeds on Pi4 It would be handy to plug a USB2 device into one of the USB3 ports on a Pi4. The machine has a keyboard, mouse and FTDI TTL232R usb- serial adapter in addition to the USB3 boot hard disk. Will us... |
![]() From: F. W. (2:221/10) To: n/a Date: Tue, 09 November 2021 MLTP - My Little Temp Project :-) Hi, I have a Raspberry Pico which is without any job. So I decided to do a little project without much time. The pico should read its temp-sensor and communicate the temp while blinking the LED: ... |
![]() From: Stefan Kaintoch (2:221/10) To: n/a Date: Sun, 07 November 2021 Re: zero w vs zero 2w [solved] Stefan Kaintoch <stefan@ratri.rincewind.kaintoch.de> wrote: > Hi *.*, > > There's a RPi zero w (1W) and a RPi zero 2w (2W). > Both can boot from the same (not a clone, physically... |
![]() From: Stefan Kaintoch (2:221/10) To: n/a Date: Sat, 06 November 2021 zero w vs zero 2w ( ![]() |
![]() From: gareth evans (2:221/10) To: n/a Date: Sun, 07 November 2021 Power Fail? I read with interest the uses to which other subscribers put their Raspberry Pis, especially those with a whole stable of such devices for a gamut of domestic applications. But what happens when ... |
![]() From: zeneca (2:221/10) To: n/a Date: Thu, 04 November 2021 any books Hello, Is there any book covering Rapsbian 'internals' describing system's call, interrupts handling, IO's etc etc There are some information available but none (I found) together. --- * Or... |