Fidonet Portal

![]() From: Vincent Coen (2:250/1) To: n/a Date: Sat, 27 August 2022 Extra functionality needed outside mbse? Hello All! I run the ELIST and BACKBONE service on a Raspberry Pi 3B+ under Debians Bullseye x32. This system uses my own software written in gnucobol that translates to C and is then compiled... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Fri, 10 June 2022 Bug report posted - Copy below Hello All! I have posted this in the echo some time back, but now it is getting dangerous. Using file group control in mbsetup via 10.1 I now have multiple copies of MAINFRAME area - see scre... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Mon, 16 May 2022 Marking a node as black balled Hello Andrew! Sunday May 15 2022 16:43, you wrote to me: > Hello Vincent! > 15 May 22 19:39, you wrote to all: VC>> Is there a way within mbse of setting a specific node a... |
![]() From: Andrew Leary (1:320/219) To: n/a Date: Sun, 15 May 2022 Marking a node as black balled Hello Vincent! 15 May 22 19:39, you wrote to all: VC> Is there a way within mbse of setting a specific node address to be VC> totally ignore just as soon as its address line is received... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Sun, 15 May 2022 Marking a node as black balled Hello All! Is there a way within mbse of setting a specific node address to be totally ignore just as soon as its address line is received ? Why, I have a node in Switzerland who polls every mi... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Sat, 07 May 2022 mand checkincking node address before forwarding Hello Wilfred! Friday May 06 2022 21:07, you wrote to me: > Hi Vincent, > On 2022-05-06 18:12:34, you wrote to All: VC>> Is there a tool that will check any outbound / forwa... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Fri, 06 May 2022 mbse and checking node address before forwarding Hello All! Is there a tool that will check any outbound / forwarding netmails for valid addresses using the nodelist ? mbse does not do this. Vincent --- Mageia Linux v8 X64/Mbse v1.0.8/G... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Mon, 02 May 2022 Routing more information from original poster BUG Found Hello All! An update from previous post : I have now received a email showing what he sent : -!- ============================================================ * Area: NetMail * From: Ping T... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Mon, 02 May 2022 Routing table processing in mbse Hello All! I have a few AKA's listed in the nodelist as I am the host for 2:25. This means that I have recorded the following : 2:25/0 as its in the nodelist for region 25 UK and Ireland 2:... |
![]() From: Louis Northmore (2:250/8.1) To: n/a Date: Mon, 25 April 2022 Changing the Standard port number used //Hello Vincent,// on *4/25/2022* at *13:18:44* You wrote in area *MBSE* to *Louis Northmore* about *"Changing the Standard port number used"*. [snip] VC> Waiting for reboot to... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Mon, 25 April 2022 Changing the Standard port number used Hello Louis! Wednesday April 13 2022 17:09, you wrote to me: > //Hello Vincent,// > on *4/13/2022* at *14:39:48* You wrote in area *MBSE* > to *All* about *"Changing the Sta... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Thu, 21 April 2022 Updated mbsedos Hello Sean! Wednesday April 20 2022 23:02, you wrote to All: > I fixed it...here is my entire "mbsedos" script with my changes: > You'll notice I converted the if statement ... |
![]() From: Sean Dennis (1:18/200) To: n/a Date: Wed, 20 April 2022 Updated mbsedos Hello All, I noticed that my MBSE system was complaining about X not being installed when I was going into DOS using "mbsedos". The problem is that the mbsedos script was out of date... |
![]() From: Sean Dennis (1:18/200) To: n/a Date: Wed, 20 April 2022 Display Screen dd-mm Hello Harald, 18 Apr 22 17:13, you wrote to me: HG> I posted the ticket. The issue has now been fixed. Thank you for bringing this to my attention! -- Sean ... "Experience is ... |
![]() From: Sean Dennis (1:18/200) To: n/a Date: Wed, 20 April 2022 MBSE, fTelnet, and DOSemu Hello All, I discovered a fix for the problem using fTelnet on your website and DOS doors under DOSemu not working due to fTelnet sending "ansi-bbs" as the term variable if your distr... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Sun, 17 April 2022 Display Screen dd-mm Hello Harald! Sunday April 17 2022 11:22, you wrote to me: > In version 1.0.7.21 of mbsebbs the display of the daily file (dd-mm) > still works. This is no longer possible in the new v... |
![]() From: Sean Dennis (1:18/200) To: n/a Date: Sun, 17 April 2022 Display issue fixed Hello All, The display issue has been fixed and I have verified it by updating my MBSE system here. You can upgrade your system to fix this: - Stop MBSE on your system. - Delete your cur... |
![]() From: Vincent Coen (2:250/1) To: n/a Date: Mon, 18 April 2022 Display screens Hello Sean! Sunday April 17 2022 19:22, you wrote to me: > Hello Vincent, > The DD-MM files are indeed in the manual. They're buried in a very > bad spot but if you look under t... |
![]() From: Sean Dennis (1:18/200) To: n/a Date: Sun, 17 April 2022 Display screens Hello Vincent, The DD-MM files are indeed in the manual. They're buried in a very bad spot but if you look under the "mbsebbs - The main BBS program" page: === Here is the list of ... |
![]() From: Sean Dennis (1:18/200) To: n/a Date: Sun, 17 April 2022 Display Screen dd-mm Hello Vincent, 17 Apr 22 22:33, you wrote to me: VC> Kindly explain this one - can't find it in the manual. It's in there somewhere, buried in the wrong place. You can create an .ANS f... |